Publications: Hose

This publication provides authoritative information on specifications for Rubber Hose for Oil Suction and Discharge (OS&D) applications. It was prepared by the Hose Technical Committee and published by the Association for Rubber Products Manufacturers. This specification covers the minimum acceptable requirements for satisfactory performance of 3" – 12" ID cargo Barge, Cargo, Dock,and Single Carcass Submarine hose.

This technical bulletin is a guide for use, maintenance, and inspection of welding hose.

This publication provides authoritative information on specifications for Rubber Welding Hose. This specification was prepared by the Hose Technical Committee of the Association for Rubber Products Manufacturers (ARPM) (Eleventh Edition, 2016).

The ARPM, in response to a request from the Society of Automotive Engineers, has established and administered a system of using colored yarns to identify hose manufacturers. Initially, the colored yarn system was applicable to only brake hose manufacturers, but in response to worldwide requests for colored yarn code assignments, the restriction was removed. Most U.S. hose manufacturers have been assigned codes. The use of hose identified by colored yarns incorporated into their structure is more reliable in identifying the manufacturer than hose marked on the exterior surface since the interior colored yarn is more likely to be retained and remain identifiable throughout the entire life of the hose.

Attached for your information is the 2021 catalog of Hose Manufacturer Identification Codes (Colored Yarn Assignments).
Also provided in the Preface is information on the assignment and/or purchase of new codes, the history of the system, and current instructions for its use.

This technical bulletin examines the guide for use, testing, and inspection of stream hose.

This technical bulletin is a manual for use, maintenance, testing, and inspection of anhydrous ammonia hose.

This technical bulletin is a guide for maintenance, testing and inspection of oil suction and discharge hose.

This technical bulletin is a manual for maintenance, testing and inspection of chemical hose.

This technical bulletin is a manual for maintenance, testing, and inspection of petroleum service station gasoline dispensing hose and hose assemblies.

This specification covers hose, three-inch inside diameter and smaller, commonly referred to as “pressure transfer hose”, used to convey anhydrous ammonia liquid or to convey anhydrous ammonia gas where the gas is in contact with liquid ammonia.

This handbook has been compiled to provide authoritative information on materials, constructions, tolerances, applications, fittings, storage, care, and maintenance of hose.